Dust class M Polyester-needle-felt (PNF)
This filter is a built in standard feature of EVOTEC industrial
vacuum cleaners for dust class M.
Surface finished Euronorm filter according to DIN EN 60335-2-69.
Späne-Emulsionssauger
3,0 kW bis 4,0 kW
Filter technology
Depending on the quality of the suction material the correct filter helps to extend the cleaning cycle, i.e. the working hours without interruption.
A proper filter is important for optimal suction results and the quality of the ambient air.
1,75 m² Ø 40 cm = 054-20003B
2,20 m² Ø 50 cm = 054-20021A
3,20 m² Ø 50 cm = 054-20041A
5,20 m² Ø 50 cm = 054-20036
1,75 m² Ø 40 cm = 054-20051B
2,20 m² Ø 50 cm = 054-20054A
3,20 m² Ø 50 cm = 054-20066A
5,20 m² Ø 50 cm = 054-20060
Dust class M with PTFE-non stick coating
Non-sticking due to its fine surface finish.
For sucking up fine dust particles of adherent or sticky character.
1,75 m² Ø 40 cm = 054-20085B
2,20 m² Ø 50 cm = 054-20086B
3,20 m² Ø 50 cm = 054-20087B
5,20 m² Ø 50 cm = 054-20088
Dust class M - NOVATES
with PUR non-stick coating
Non-sticking due to its fine PUR surface finish.
For sucking up fine dust particles with abrasive character (e.g.
fiberglass).
1,75 m² Ø 40 cm 054-20053B
2,20 m² Ø 50 cm 054-20056A
3,20 m² Ø 50 cm 054-20068A
5,20 m² Ø 50 cm 054-20062
Dust class M with aramid coating
Heat resistant as far as 200 °C (about 392 °F) for a short period
up to 30 minutes .
For sucking up hot dust particles that (e.g.) can arise from a
hot production process.
1,75 m² Ø 40 cm = 054-20052B
2,20 m² Ø 50 cm = 054-20055A
3,20 m² Ø 50 cm = 054-20067A
5,20 m² Ø 50 cm = 054-20061
Dust class M with PTFE- non-stick coating
Antistatic because of metal threads that are mixed with the filter
material. For sucking up dust particles that can become statically
charged.
Food-safe – for usage in high sensitive areas like pharma or food production.
1,7 m² Ø 40 cm = 054-20018
2,0 m² Ø 50 cm = 054-20027
4,3 m² Ø 50 cm = 054-20033
Absolut-cartridge filter, dust class H
for safety vacuum cleaner.
GS-certificated material with a deposition rate of 99,995 %
External compressed air necessary!
Suitable for model EP 2155, EP 2175 and EP 21130
Cartridge filter unit
Filter surface 7,5 m²
Perfect for automatic and continous cleaning of filter cartridge
while sucking up very fine and dry dust particles.
Cleaning cycles induced by the automatic control can be defined as
required. The system cleans the filter elements in the cartridge
with blasts of compressed air. Motor shut down is not necessary.
Filter cartridge class M, antistatic (standard)
053-3020
Activated carbon filter module
To absorb odors and fumes. 25-l-container, individual matching,
suitable for all models with turbine chassis
053-2060
